﹛ |
Years of development experiences Months of hard design
work
M08B---QL200B PIC DEVELOPMENT System
Demo board for PIC Microcontroller with the highest cost
performance
|
|
QL200B is an
integrated demo system for study and development of PIC Microcontroller, which is
provided with four functions of experimental instrument, programmer,
simulation interface and ISCP download cable. Enclosed with control CPU
and combined with programming software which has independent
intellectual property rights, the system is able to support over 90
percent of the experiments and development practices of PIC Microcontroller. |
To easily study and develop all series of PIC Microcontrollers, only a
set of QL200B demo system and a computer are needed. Based on programming
functions, abundant on-board hardware resources, flexible expansion,
free resource distribution, and ICSP download function for customer
target board, QL200B can not only satisfy the demands of a beginner in
Microcontroller study, but also meet the requirements of engineers in development of
Microcontroller. In addition to a study & experimental board, QL200 is also a demo
board of Microcontroller integrated with multiple resources.
|
 |
|
|
|
On-board resourcesㄩ
|
|
RS-232
communication for connection with a PC or any other device with
a DB9 connector.(use
DuPont wire can be connected to the arbitrary I/O port) |
|
|
24 LEDs are provided. 每 to connect optionally with the port RA, RB and
RC of Microcontroller for indication of output high/low level at I/O port.(use
DuPont wire can be connected to the arbitrary I/O port) |
|
|
4*4 Matrix keyboard 每 to test
password lock and other items.(use DuPont wire can be connected to the arbitrary
I/O port) |
|
|
|
|
|
8-buttons are provided每for easy
various key-press input experiments and jumper setup for pull-up or pull-down of
port hardware.(use DuPont wire can be connected to the arbitrary I/O port) |
|
|
2
Potentionmeters for simulating analog voltage input.(use
DuPont wire can be connected to the arbitrary I/O port) |
|
|
PIC Microcontroller chip socket 每 including 8PIN, 14PIN, 18PIN, 20PIN,
28PIN, 40PIN, PIC10 series, and PIC16F57 special socket.(including
PIC10XX,PIC12XX,
PIC16XX,PIC18XX
socket) |
|
|
|
|
|
DS1302 clock 每 enclosed with memory capacity.(use DuPont wire can be connected to the arbitrary
I/O port)(Battery is not included) |
|
|
ICD2 connector for customers who
want to use it. 每 to directly connect
ICD1/ICD2/MCD1/MCD2 and carry out on-line simulation for on-board
chips and resources.
|
|
|
IIC (I2C)
communication 每 to read/write 24CXX series chips with hardware
IIC or software IIC directly. (use
DuPont wire can be connected to the arbitrary I/O port) |
|
|
|
|
|
SPI communication每to read/write EEPROM of
93CXX with hardware SPI or software analog SPI,to select 8-bit or
16-bit read/write method through jumper.(use
DuPont wire can be connected to the arbitrary I/O port) |
|
|
Serial 10-bit voltage DA converter每
TLC5615 chip, direct digital-to-analog converter, on-board analog output
interface .(use DuPont
wire can be connected to the arbitrary I/O port)
(remarkㄩ chip TLC5615 is optional). |
|
|
Digital thermometer DS1820 for measuring temperature from -55ºC to
125ºC.(use DuPont wire can be connected to the arbitrary I/O
port)(remarkㄩ chip DS18B20 is optional). |
|
|
|
|
|
Infrared remote-control receiver 每
to practice infrared remote-control decoding and all kinds of infrared remote
control.(use DuPont wire
can be connected to the arbitrary I/O port) |
|
|
Buzzer voice/PWM output experiment
每 to practice normal voice, music and PWM output sound.(use
DuPont wire can be connected to the arbitrary I/O port) |
|
|
Clock selection
每 jumper for switch between various oscillation modes, to replace
crystal vibration of different frequency as required by development
of product. |
|
|
|
|
|
All pins are taken out on IDC10 connectors to make them available for further
connections. |
|
|
Stepper motor driver circuit(use
DuPont wire can be connected to the arbitrary I/O port)(remark: Setpper motor is optional). |
|
|
MMC\SD card slot - For MMC\SD memory cards. Used for data acquisition.(use
DuPont wire can be connected to the arbitrary I/O port)(remark:
MMC\SD card is optional). |
|
|
|
On-board programming module 每 to communicate with computer through USB,
adaptable for any kind of computer, special CPU supervision, stable
programming, enclosed with ICSP interface and ICSP download cable,
convenient on-line programming for other target board, programming
control software with independent intellectual property rights, all
functions of professional programmer.
|
|
|
On-board power module 每 Power
Supply select
- USB or external. Also there is a
switch for turning on/off system.can connect to the polarity of
external AC or DC power supply optionally, voltage range 7-12V, current over
200MA; available for supply through USB without external power, |
|
|
|
12864- Graphic LCD每128*64 lattices.(use
DuPont wire can be connected to the arbitrary I/O port)(remarkㄩ 12864- character LCD is optional). |
|
|
1602-character LCD每internal 5*7
lattices, to display 16*2-character.(use
DuPont wire can be connected to the arbitrary I/O port) |
|
|
6bit 7-segment digital tube 每 to
realize dynamic or static display experiment of digital tube, to display
clock,temperature or to make counter.(use
DuPont wire can be connected to the arbitrary I/O port) |
|
|
Characteristicsㄩ
|
- Abundant on-board resourcesㄩ LED,
digital tube, key-press, keyboard matrix, character LCD, graphic LCD, A/D
converter, D/A converter, SPI & IIC communication, USART serial communication,
DS18B20 digital temperature measurement, DS1302 clock, infrared remote control
encoder, voice program and etc.
- Full combination of PIC chips available for
programming supporting and experiment developmentㄩ on-board chip
socket for PIC Microcontroller of 8PIN, 14PIN, 18PIN, 20PIN, 28PIN, and 40PIN, on-board
PIC10 series, PIC16F57 chip socket, jumper for selection of various oscillation
modes, auto-replacement of crystal oscillation of different frequency.
- Open modular designㄩ All modules can be
on/off controlled by DIP switch. Each module is designed to connect to I/O port
of Microcontroller. Connection of module with any port of Microcontroller is conveniently achieved
through dupont thread. Connection to preset port is available by using DIP
switch without dupont thread. All I/O ports are open externally with output
socket. Expansion is easily accomplished.
- Perfect examplesㄩ Each module is
equipped with at least one detailed example from easy ones to complicated ones.
Beginners are enabled to master all types of programming step by step.
- Powerful on-board programming systemㄩ
Programming over 90 percent of PIC Microcontrollers. Enclosed with ICSP download cable.
Direct ICSP programming for Microcontroller of external target board.
- On-board simulation debugging interfaceㄩ
direct connection to ICD1/ICD2/MCD1/MCD2 in circuit debugger.
- Powerful programming control softwareㄩ
Programming control software has entire independent intellectual property rights
and covers all operating functions of programmer, with the following
characteristicsㄩ
1﹜Compatible for operating systems including Windows 98, Windows 2000/NT,
Windows XP and Windows 2003; 2﹜Programming interface in English and Chinese, on-line help system, convenient
for user operation; 3﹜Programming counting function of software; 4﹜Serial number auto-increment function; 5﹜Voice indication during programming; 6﹜Auto-inspection of programming hardware, auto-inspection of software and setup
of programming hardware during start-up, operation without manual setup; 7﹜Monitoring of programming data; Based on check summing, available to find
immediately if programming data is changed or not. Formula of checksum is
subject to definition of Microchip; 8﹜Read the content in chip programming area easily; 9﹜Program supports *.HEX or *.BIN files; 10﹜Fill function of buffer; 11﹜Auto-protection of calibration value of chip clock against erasion; 12﹜Directly program the BIN files obtained from decoding of Microcontroller without making
any setup. ﹛
- In addition to above characteristics,many humanized
functions are designed in the development of QL200,For examplesㄩ
Over-load protection functionㄩ When there is over load in the demo
system, the protection system will automatically start to avoid any damage of
elements. After fault is corrected, the board will recover to work.
Auto-load of changed file functionㄩ To achieve seamless integration with
MPLAB IDE and other development software, the changed current target code is
inspected automatically and then is transferred into the updated file
automatically. This function offers great convenience for study and development,
which avoids the trouble in repeating load of target code.
Function to identify the figuration bit and EEPROM in the file automaticallyㄩ
When we write the configuration bit information and EEPROM data in the program,
otherwise setup is not needed for programming. This function saves much time for
regular change in program debugging and avoids the setup requirement for each
program change.
On-board CPU on-line upgrade functionㄩ
It is available to download the updated programming software and run to upgrade
hardware, which will upgrade on-board CPU to the updated version so that it can
support more new devices.
|
﹛ |
QL200B can support
the following devices for programming and experimental developmentㄩ |
PIC10FXXㄩ
|
PIC10F200
|
PIC10F202
|
PIC10F204
|
PIC10F206
|
PIC10F220
|
PIC10F222
|
|
PIC12XXㄩ
|
PIC12C508
|
PIC12C508A
|
PIC12C509
|
PIC12C509A
|
PIC12C671
|
PIC12C672
|
PIC12CE518
|
PIC12CE519
|
PIC12CE673
|
PIC12CE674
|
PIC12F508
|
PIC12F509
|
PIC12F629
|
PIC12F635
|
PIC12F675
|
PIC12F683
|
PIC12F615
|
PIC12HV615
|
﹛
|
﹛
|
﹛
|
PIC16XXㄩ
|
PIC16C505
|
PIC16C554
|
PIC16C558
|
PIC16C61
|
PIC16C62
|
PIC16C62A
|
PIC16C62B
|
PIC16C62A
|
PIC16C62B
|
PIC16C63
|
PIC16C63A
|
PIC16C64
|
PIC16C64A
|
PIC16C65
|
PIC16C65A
|
PIC16C65B
|
PIC16C66
|
PIC16C66A
|
PIC16C67
|
PIC16C620
|
PIC16C620A
|
PIC16C621
|
PIC16C621A
|
PIC16C622
|
PIC16C622A
|
PIC16C71
|
PIC16C72
|
PIC16C72A
|
PIC16C73
|
PIC16C73A
|
PIC16C73B
|
PIC16C74
|
PIC16C74A
|
PIC16C74B
|
PIC16C76
|
PIC16C77
|
PIC16C710
|
PIC16C711
|
PIC16C712
|
PIC16C716
|
PIC16C745
|
PIC16C765
|
PIC16C773
|
PIC16C774
|
PIC16C83
|
PIC16C84
|
PIC16F505
|
PIC16F506
|
PIC16F54
|
PIC16F57
|
PIC16F627
|
PIC16F616
|
PIC16HV616
|
PIC16LF627A
|
PIC16F627A
|
PIC16F628
|
PIC16F628A
|
PIC16LF628A
|
PIC16F630
|
PIC16F636
|
PIC16F639
|
PIC16F648A
|
PIC16F676
|
PIC16F683
|
PIC16F684
|
PIC16F685
|
PIC16F687
|
PIC16F688
|
PIC16F689
|
PIC16F690
|
PIC16F716
|
PIC16F72
|
PIC16F73
|
PIC16F74
|
PIC16F76
|
PIC16F77
|
PIC16F737
|
PIC16F747
|
PIC16F767
|
PIC16F777
|
PIC16F785
|
PIC16F83
|
PIC16F84
|
PIC16F84A
|
PIC16F87
|
PIC16F88
|
PIC16F818
|
PIC16F819
|
PIC16F870
|
PIC16F871
|
PIC16F872
|
PIC16F873
|
PIC16F873A
|
PIC16F874
|
PIC16F874A
|
PIC16F876
|
PIC16F876A
|
PIC16F877
|
PIC16F877A
|
PIC16F913
|
PIC16F914
|
PIC16F916
|
PIC16F917
|
PIC16F883 |
PIC16F884 |
PIC16F886 |
PIC16F887 |
﹛ |
﹛ |
﹛ |
﹛
|
﹛
|
PIC18FXXㄩ
|
PIC18F242
|
PIC18F248
|
PIC18F252
|
PIC18F258
|
PIC18F442
|
PIC18F448
|
PIC18F452
|
PIC18F458
|
PIC18F1220
|
PIC18F1320
|
PIC18F2220
|
PIC18F2221
|
PIC18F2320
|
PIC18F2321
|
PIC18F2331
|
PIC18F2410
|
PIC18F2420
|
PIC18F2431
|
PIC18F2450
|
PIC18F2455
|
PIC18F2480
|
PIC18F2510
|
PIC18F2515
|
PIC18F2520
|
PIC18F2525
|
PIC18F2550
|
PIC18F2580
|
PIC18F2585
|
PIC18F2610
|
PIC18F2620
|
PIC18F2680
|
PIC18F4220
|
PIC18F4221
|
PIC18F4320
|
PIC18F4321
|
PIC18F4331
|
PIC18F4410
|
PIC18F4420
|
PIC18F4431
|
PIC18F4450
|
PIC18F4455
|
PIC18F4480
|
PIC18F4510
|
PIC18F4515
|
PIC18F4520
|
PIC18F4525
|
PIC18F4550
|
PIC18F4580
|
PIC18F4585
|
PIC18F4610
|
PIC18F4620
|
PIC18F4680
|
﹛
|
﹛
|
﹛
|
﹛
|
|
QL200B Software(English
Version)ㄩ |
|
﹛ |
﹛ |
|
QL200B series dupont thread expansion connection |
|
|
QL200B series ICSP on-line download cable, collocation of interfaces
compatible for ICD1/ICD2/MCD1/MCD2 |
|
|
Sample with C and ASM Program sources code as below
(using PIC16F877A):
Buzzer
128x64 GLCD (See the following Photos)
1602 LCD (See the following Photos)
93C46
24C02
4x4 Key testing
8x LED
7x segment
ADC / DAC
Infrared Remote
|
Related Downloads: |
|

Board Resource Introduction:
1) Switch between power supply
thru USB or external power
supply.
2) 128*64LCD and 16*2 LCD module
3) 32 LEDs are provided.
4) 4x4 matrix keyboard module
5) 8 buttons are provided.
6) Potentionmeters for simulating analog voltage
input.
7) IIC (24C01/02 EEPROM)communication
module
8) SPI (93C46 EEPROM)communication module
9) Real Time Clock DS1302. (Battery
is not included)
10) Reset circuit.
11) ICD2 connector for customers who want to use it.
12) On-board programming module (USB Communication)
13) Chip socket and system clock selection
14) Digital LED display with 6bit 7-segment
15) Remote control receiver and decoder module
16) Digital thermometer DS1820 for temperature
measurement from -55∼C to 125∼C.
17) Beeper experimental module
18) RS-232 communication for connection with a PC or
any other device with a DB9 connector
19) Serial 10-bit voltage DA (TLC5615) converter for
applications in measure - regulating devices.
20) All pins are taken out on IDC10 connectors to
make them available for further connections.
21) Stepper Motor Driver Module
22) SD/MMC card Read/Write Module
23) Free Chip PIC16F877A-I/P |
|
Standard
configurationㄩ |
Product Serial No.ㄩ
M08B Weight:1.3kg |
PriceㄩUS
$129.99 shipping:
US $50.00 Total:
US $179.99 |
The auction includes
- QL200B PIC DEVELOPMENT System
-
USB cable
- ICSP cable
- RS232 Cable
- 16F877A Chip
- 1602 LCD with Yellow backlight
- CD-ROM or USB Flash Disk(Programmer Driver , PDF User manual ,QL200 Layout,QL200 Board Schematic , Sample code (C / ASM) , MPLAB 7.50 .)
Compatible for OS including Windows 98, Windows 2000/NT, Windows XP , Windows 2003 and Vista
- Dupont thread expansion connection 20x wire
- 170 * 60mm high-quality bread board *1
|
|
﹛ |
|
Optional parts:
- 10-bit D/A converter TLC5615 (DIP8 package)
US$5.00 for each
- DS18B20 ( DS1820 ) Temperature Sensor(TO-92 package)
US$3.00 for each
- 12864-character LCD Module Yellow Backlight
US$14.00 for each
- 1602 LCD with Yellow backlight
(have include in package)
Each additional US$4.00
Stepper motor US$5.00 for each
PIC12F629-I/P (DIP8) - US$2.00 for each
PIC12F675-I/P(DIP8)- US$2.00 for each
PIC10F202-I/P(DIP8)- US$2.00 for each
PIC16F54(DIP18) - US$2.00 for each
PIC16F57(DIP28) - US$2.50 for each
PIC16F628A(DIP18) - US$3.00 for each
PIC16F84A(DIP18) - US$3.00 for each
PIC16F630(DIP14) - US$2.00 for each
PIC16F676(DIP14)- US$2.00 for each
PIC16F72(DIP28) - US$2.50 for each
PIC16F716(DIP18) - US$2.50 for each
PIC16F876A(DIP28) - US$4.20 for each
PIC16F877A(DIP40) - US$4.50 for each
Worldwide shipping by DHL/UPS/TNT/FedEx/EMS... Express---- (about 3-7days)
Purchasing Instructions:
At the time of purchase, please indicate the following:
Contact telephone number for shipping purposes
FAQ |
Hi, if we buy now, when you shipped to me ?
|
- When we received you payment, we will sent
the items to you within 1-2 work days !
|
you sent the items to me ,you have the tracking
number for me ? |
-
We will send you by DHL/UPS/FedEX/TNT/EMS..Express,
This is have provide Tracking number!
and it can takes
3-7 working days !
|
If the item in the swap in the transport stolen, and
you will be re-distributed to us? |
- If you buy the parts, within the prescribed
time did not receive goods, we will re-sent to
you.
﹛
- For example,
if you buy the parts on jaunary 1, you will
received the parts on Jaunary 15 before, becuase
it takes 3-7 working days, if you not received
the parts on Jaunary 15 before, please tell me
we, we will re-sent to you!
﹛
|
- We WON'T resend any bounce back order due to
incorrect shipping address
|
﹛ |
payment method |
- Accept paypal
Credit card through Paypal
- Accept Pay to bank of chian
- Accept wester union
I will ship to the shown address on you PAYPAL
Payment notice.
Please confirm your shipping address in the
PayPal Account
or Please tell me your
shipping address by Email,
Please tell me you phone number
Buyers need to absorb ALL re-shipments fee of
returned packages
|
Return Policy |
- 100% money back guarantee or exchange the
same class of the products.
Full refund will be issued upon receipt of the
Deffective Item.
Please be advised that shipping and handling
cost are not refundable.
Buyers must be returned the defective products
within 7 days from the date when product
received.
Refund or Replacement will be sent after we
received your returning item.
In all cases, buyers pay shipping at their own
cost to return products for exchange or refund.
|
Shipping Schedule |
- Normally, Your order will be shipped within
1-2 our business days after the payment is
cleared.
The shipping time may vary, depends on
receiver's location.
|
Item Declare |
- Your item will mark as Gift or Sample and a
low's value.
We are NOT responsible for any import tax,
customs fees or customs delay.
Buyer cannot request to cancel the auction or
request for refund under this situation. Please
check with your local tax authorities BEFORE
bidding.
However, most of our items can reach to buyers
without any taxes.
|
﹛
Payment methods 1: Direct remittance to PAYPAL |
| | |